The automatic cleaning plan for the observation window glass in the operation room of the garbage treatment plant adopts a combination of rolling brush and pressure pure water spraying. The steel wire ropes are used on both sides of the rolling brush for traction, and each piece of glass is cleaned one by one. After cleaning, it automatically rolls back to the top hidden protection bin of the rolling brush, which not only does not affect the field of view but also protects the rolling brush. This cleaning device is recommended to be installed on the steel or concrete structure that is clipped into the outside of the window, so that there is no need to make structural changes such as drilling holes on the original structure. Construction process: First, install a frame on the outermost edge of the window, with guide rails on the upper and lower parts of the frame. The rolling brush can be moved along the guide rails through pulleys. Firstly, install a frame on the outermost edge of the window, with guide rails on the upper and lower parts. The roller brush can move along the guide rails through pulleys. The movement of all cleaning mechanisms adopts PLC wireless remote control mode, with the aim of stable operation. The cleaning and operation processes in many scenarios require different customized solutions due to their different structures. Various cleaning and operation mechanisms are customized for the application site, and low-cost cleaning and operation solutions are customized for users.
